Display Dhcp-Client - 3Com Wireless LAN Switch WX1200 Command Reference Manual

138 C 7: IP S
HAPTER

display dhcp-client

C
ERVICES OMMANDS
Table 29 describes the fields in this display.
Table 29 Output for display arp
Field
ARP aging time
Host
HW Address
VLAN
Type
State
See Also
set arp on page 158
set arp agingtime on page 159
Displays DHCP client information for all VLANs.
Syntax — display dhcp-client
Defaults — None.
Access — All.
History — Introduced in MSS Version 4.0.
Description
Number of seconds a dynamic entry can remain unused
before MSS removes the entry from the ARP table.
IP address, hostname, or alias.
MAC address mapped to the IP address, hostname, or alias.
VLAN the entry is for.
Entry type:
DYNAMIC — Entry was learned from network traffic and
ages out if unused for longer than the ARP aging
timeout.
LOCAL — Entry for the WX switch's MAC address. Each
VLAN has one local entry for the WX switch's MAC
address.
PERMANENT — Entry does not age out and remains in
the configuration even following a reboot.
STATIC — Entry does not age out but is removed after a
reboot.
Entry state:
RESOLVING — MSS sent an ARP request for the entry
and is waiting for the reply.
RESOLVED — Entry is resolved.