Traffic Statistics Configuration Example - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches

2.3.7 Traffic Statistics Configuration Example

I. Networking requirement
Suppose the IP address of PC1 is 1.0.0.1 and that of PC2 is 2.0.0.2. The switch is
uplinked through the port GE7/0/8. Count the packets sent 8:00~18:00 each day from
the switch to PC1.
II. Networking diagram
GE7/0/1
VLAN2,
1.0.0.1/8
PC1
Figure 2-8 QoS configuration example
III. Configuration procedure
1) Define the time range 8:00~18:00.
# Define the time range.
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Define traffic rules for PC1 packets.
# Define traffic classification rules for PC1 packets.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule 0 permit source 1.1.1.1 0.0.0.0 time-range huawei
3) Count PC1 packets, view the statistics with the display command.
# Enter QoS view.
[Quidway-GigabitEthernet7/0/1] qos
[Quidway-qosb-GigabitEthernet7/0/1]
# Count PC1 packets, view the statistics with the display command.
[Quidway-qosb-GigabitEthernet7/0/1] traffic-statistic inbound ip-group 2000 rule 0
[Quidway] display qos-interface GigabitEthernet7/0/1 traffic-statistic
GE7/0/8
GE3/0/2
VLAN3,
2.0.0.1/8
PC2
Huawei Technologies Proprietary
2-31
Chapter 2 QoS Configuration