Activate Acl - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches

1.2.4 Activate ACL

The defined ACL can be active after activated globally on the switch. This function is
used to activate the ACL filtering or classify the data transmitted by the hardware of
switch.
You can use the following command to activate the defined ACL.
Perform the following configuration in Qos view.
I. Configuration on A Type Card
Table 1-9 Activate ACL
Operation
Activate an ACL
Deactivate an ACL
Note:
A type card includes LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA and
LS81GT8UA cards.
II. Configuration on the Cards except A Type Ones
Table 1-10 Activate ACL
Operation
Activate an ACL
Deactivate an ACL
packet-filter { inbound | outbound } { ip-group
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number |
[ not-care-for-interface ]
undo packet-filter { inbound | outbound } { ip-group
{ acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }
packet-filter inbound { user-group { acl-number |
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }
undo packet-filter inbound { user-group { acl-number |
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }
Huawei Technologies Proprietary
1-10
Chapter 1 ACL Configuration
Command
acl-name } [ rule
Command
rule ] }