Disable The Ntp Service Globally; Ntp Display And Debugging - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 7-14 Set the maximum local dynamic sessions
Set the
sessions
Restore
maximum number of local dynamic
sessions
By the default, the number of local dynamic sessions is 100.
Note:
Only the sessions created by NTP peer mode, NTP broadcast client mode and NTP
multicast client mode are dynamic sessions. Other sessions are static sessions.

7.2.10 Disable the NTP Service Globally

This configuration task is to disable the NTP service function globally.
Perform the following configurations in system view.
Table 7-15 Disable the NTP Service Globally
Disable the NTP service function globally
Enable this function globally
By default, the NTP service is enabled.

7.3 NTP Display and Debugging

After completing the above configurations, you can use the display command to show
how NTP runs and verify the configurations according to the outputs.
In user view, you can use the debugging command to debug NTP.
Operation
maximum local dynamic
the default value
Operation
Huawei Technologies Proprietary
ntp-service
number
of the
undo
max-dynamic-sessions
ntp-service disable
undo ntp-service disable
7-10
Chapter 7 NTP Configuration
Command
max-dynamic-sessions
ntp-service
Command