Huawei Quidway S6500 Series Operation Manual page 167

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
155.10.1.0 and 196.38.165.0. Switch C, Switch A and Switch B are connected via
Ethernet 110.11.2.0. Correctly configure RIP to ensure that Switch C, Switch A and
Switch B can interconnect.
3.4.2 Networking diagram
Ethernet
SwitchC
Network address:
117.102.0.0/16
Figure 3-1 RIP configuration networking
3.4.3 Configuration procedure
Note:
The following configuration only shows the operations related to RIP. Before
performing the following configuration, please make sure the Ethernet link layer can
work normally.
1) Configure Switch A:
# Configure RIP
[Switch A] rip
[Switch A-rip] network 110.11.2.0
[Switch A-rip] network 155.10.1.0
2) Configure Switch B:
Interface address:
155.10.1.1/24
Interface address:
110.11.2.1/24
Interface address:
Interface address:
117.102.0.1/16
196.38.165.1/24
Huawei Technologies Proprietary
3-14
Chapter 3 RIP Configuration
Network address:
155.10.1.0/24
SwitchA
Network address:
110.11.2.2/24
SwitchB
Network address:
196.38.165.0/24