Huawei Quidway S6500 Series Operation Manual page 237

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
V. Removing private AS numbers while transmitting BGP update messages
Generally, the AS numbers (public AS numbers or private AS numbers) are included in
the AS paths while transmitting BGP update messages. This command is used to
configure certain outbound routers to ignore the private AS numbers while transmitting
update messages.
Table 6-13 Removing private AS numbers while transmitting BGP update messages
Remove private AS numbers while
transmitting BGP update messages
Include private AS numbers while
transmitting BGP update messages
By default, the private AS numbers are included while transmitting BGP update
messages.
VI. Configuring to send the community attributes to a peer group
Table 6-14 Configuring to send the community attributes to a peer group
Configure to send the community
attributes to a peer group
Configure not to send the community
attributes to a peer group
VII. Configuring the repeating time of local AS
Using peer allow-as-loop command, the repeating time of local AS can be configured.
Perform the following configurations in BGP view.
Table 6-15 Configuring the repeating time of as-path
Configure the repeating time of local AS
Remove the repeating time of local AS
Operation
Operation
Operation
Huawei Technologies Proprietary
6-10
Chapter 6 BGP Configuration
Command
peer group-name public-as-only
undo peer group-name public-as-only
Command
peer
advertise-community
undo peer
advertise-community
Command
peer { group-name | peer-address }
allow-as-loop [ number ]
undo peer {
peer-address } allow-as-loop
group-name
group-name
group-name |