Huawei Quidway S6500 Series Operation Manual page 272

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
should satisfy the requirement of the protocol by specifying a route cost for the imported
route.
Perform the following configuration in routing protocol view.
Table 7-4 Configuring to import the routes of other protocols
Set to import routes of
other protocols
Cancel the setting for
importing routes of other
protocols
By default, the routes discovered by other protocols will not be distributed.
Note:
In different routing protocol views, the parameter options are different. For details,
respectively refer to the import-route command in different protocols.
7.2.5 Defining ip-Prefix
A prefix-list is identified by the ip-prefix name. Each ip-prefix can include multiple items,
and each item can independently specify the matching range of the network prefix
forms. The index-number specifies the matching sequence in the prefix-list.
Perform the following configurations in system view.
Table 7-5 Defining Prefix-list
Operation
Define Prefix-list
Remove Prefix-list
During the matching, the router checks list items identified by the index-number in the
ascending order. If only one list item meets the condition, it means that it has passed
the ip-prefix filtering (will not enter the testing of the next list item).
Operation
import-route protocol [ med med | cost cost ] [ tag
value ] [ type 1 | 2 ] [ route-policy route-policy-name ]
undo import-route protocol
ip ip-prefix ip-prefix-name [ index index-number ] { permit |
deny } network len [ greater-equal greater-equal ]
[ less-equal less-equal ]
undo ip ip-prefix ip-prefix-name [ index index-number |
permit | deny ]
Huawei Technologies Proprietary
Chapter 7 IP Routing Policy Configuration
Command
Command
7-7