Huawei Quidway S6500 Series Operation Manual page 189

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Table 4-22 Configuring Parameters for OSPF to Import External Routes
Configure the minimum interval for OSPF to import
the external routes
Restore the default value of the minimum interval
for OSPF to import the external routes
Configure the upper limit to the routes that OSPF
import each time
Restore the default upper limit to the external routes
that can be imported at a time
Configure the default cost for the OSPF to import
external routes
Restore the default cost for the OSPF to import
external routes
Configure the default tag for the OSPF to import
external routes
Restore the default tag for the OSPF to import
external routes
Configure the default type of external routes that
OSPF will import
Restore the default type of the external routes
imported by OSPF
By default, when importing external routes, the type of imported route is type-2, the cost
is 1 and the tag is 1. The interval of importing the external route is 1 second. The upper
limit to the external routes imported is 1000 per second.
4.2.23 Configuring OSPF to Import the Default Route
The import-route command cannot be used to import the default route. Using the
command as follows, you can import the default route into the routing table.
Perform the following configuration in OSPF view.
Operation
Huawei Technologies Proprietary
4-21
Chapter 4 OSPF Configuration
Command
default interval seconds
undo default interval
default limit routes
undo default limit
default cost value
undo default cost
default tag tag
undo default tag
default type { 1 | 2 }
undo default type