Huawei Quidway S6500 Series Operation Manual page 129

Operation Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
7.3 Display and Debug IPX
After the above configuration, execute display command in any view to display the
running of the IPX configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug IPX. Execute reset command in user view
to clear IPX statistics.
Table 7-24 Display and debug IPX
Display the information of IPX on one or
all VLAN interfaces
Display
information
Display the IPX service information table
Display the IPX routing information
Clear the IPX statistics information
Clear the IPX routing table information
Disable/Enable IPX SAP debugging
Disable/Enable IPX packet debugging
Disable/Enable IPX ping debugging
Disable/enable IPX RIP debugging
Disable/Enable IPX triggered updates
debugging
Disable/Enable IPX interface debugging
Disable/Enable
debugging
Operation
the IPX packet statistics
IPX routing
Huawei Technologies Proprietary
display ipx interface [ vlan-interface
vlan-id ]
display ipx statistics
display ipx service-table [ inactive |
name name | network network | order
{ network | type } | type service-type ]
[ verbose ]
display ipx routing-table [ network
[ verbose ] | protocol { default | direct |
rip | static } [ inactive | verbose ] |
statistics | verbose ]
reset ipx statistics
reset ipx
protocol { all | default | direct | rip |
static }
[ undo ] debugging ipx sap [ packet
[ verbose ] | event ]
[ undo ] debugging ipx packet
[vlan-interface vlan-id ]
[ undo ] debugging ipx ping
[ undo ] debugging ipx rip { packet
[ verbose ] | event }
[ undo ] debugging ipx rtpro-flash
[ undo ] debugging ipx rtpro-interface
table
[ undo ] debugging ipx rtpro-routing
7-13
Chapter 7 IPX Configuration
Command
routing-table statistics