Huawei Quidway S6500 Series Operation Manual page 64

Operation Manual - Port
Quidway S6500 Series Ethernet Switches
Table 2-6 Configure port priority
Configure port priority
Restore the default port priority
By default, port priority is 32768.
2.3 Display and Debug Link Aggregation
After the above configuration, execute display command in any view to display the
running of the link aggregation configuration, and to verify the effect of the
configuration.
You can also use in user view the reset command to clear LACP statistics of the port
and debugging commands to debug LACP.
Table 2-7 Display and debug link aggregation
Display
information
aggregation groups
Display
information of a specific
aggregation group
Display local system ID
Display
aggregation information at
the port
Clear LACP statistics at the
port
Disable/enable debugging
LACP state machine
Disable/enable debugging
LACP packets
Disable/enable debugging
link aggregation errors
Operation
Operation
summary
of all display link-aggregation summary
detailed
display link-aggregation verbose [ agg-id ]
display lacp system-id
detailed link display link-aggregation interface { interface-type
interface-number
{ interface-type interface-num | interface-name } ]
reset lacp statistics [ interface { interface-type
interface-number
{ interface-type interface-num | interface-name } ] ]
[ undo ] debugging lacp state [ interface
{ interface-type interface-number | interface-name }
[
interface-name } ] ] { { actor-churn | mux |
partner-churn | ptx | rx }* | all }
[ undo ] debugging lacp packet [ interface
{ interface-type interface-number | interface-name }
[
interface-name } ] ]
[ undo ] debugging link-aggregation error
Huawei Technologies Proprietary
Chapter 2 Link Aggregation Configuration
lacp port-priority port-priority-value
undo lacp port-priority
Command
| interface-name
| interface-name
to { interface-type
to { interface-type
2-8
Command
} [
} [
interface-num
interface-num
to
to
|
|