Huawei Quidway S6500 Series Operation Manual page 239

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
The route filtering policy of advertised routes configured for each member of a peer
group must be same with that of the peer group but their route filtering policies of
ingress routes may be different.
Please perform the following configurations in BGP view.
I. Configuring route policy for a peer (group)
Table 6-18 Configuring route policy for a peer (group)
Configure the ingressroute policy for a
peer (group)
Remove the ingress route policy of a
peer (group)
Configure egress route policy for a peer
group
Remove the egress route policy of a
peer group
By default, no route policy is applied on peer (group).
II. Configuring route filtering policy based on IP ACL for a peer (group)
Table 6-19 Configuring route filtering policy based on IP ACL for a peer (group)
Configure the ingress route filtering
policy based on IP ACL for a peer
(group)
Remove the ingress route filtering policy
based on IP ACL of a peer (group)
Configure the egress route filtering
policy based on IP ACL for a peer group
Remove the egress route filtering policy
based on IP ACL for a peer group
By default, route filtering based on IP ACL for a peer (group) is disabled.
Operation
Operation
Huawei Technologies Proprietary
6-12
Chapter 6 BGP Configuration
Command
peer { peer-address | group-name }
route-policy route-policy-name import
undo peer {
group-name } route-policy policy-name
import
peer group-name
route-policy-name export
undo peer group-name route-policy
route-policy-name export
Command
peer { peer-address | group-name }
filter-policy acl-number import
undo peer {
group-name } filter-policy acl-number
import
peer group-name
acl-number export
undo peer group-name filter-policy
acl-number export
peer-address |
route-policy
peer-address |
filter-policy