Huawei Quidway S6500 Series Operation Manual page 304

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
Please perform the following configurations in system view.
Table 4-2 Configuring number limit of multicast routing entries
Configure number limit of multicast routing
entries
Restore the default number limit
By default, the number limit of multicast routing entries is the maximum value permitted
by the system, which differs by the types of routers.
4.2.3 Clearing MFC Forwarding Entries or Statistics
Please perform the following configurations in user view.
Table 4-3 Clearing MFC forwarding entries or statistics
Operation
Clear
forwarding entry or
the statistics
4.2.4 Clearing Routing Entries in Multicast Kernel Routing Table
Please perform the following configurations in user view.
Table 4-4 Clearing the routing entries in the multicast kernel routing table
Operation
Clear
entry
multicast
routing table
The forwarding entries in MFC are deleted along with the routing entries in the multicast
kernel routing table.
4.2.5 Displaying and Debugging Common Multicast Configuration
I. Displaying and debugging
After the above configuration, execute the display commands in any view to display the
information of multicast operating status, and to verify the effect of the configuration.
Operation
reset multicast forwarding-table [ statistics ] { all |
MFC { group-address [ mask { group-mask | group-mask-length } ] |
source-address
source-mask-length } ] | incoming-interface interface-type
interface-number } * }
routing reset multicast routing-table { all | { group-address [ mask
from the { group-mask | group-mask-length } ] | source-address [ mask
kernel { source-mask | source-mask-length } ] | { incoming-interface
interface-type interface-number } } * }
Huawei Technologies Proprietary
Chapter 4 Common Multicast Configuration
multicast route-limit limit
undo multicast route-limit
Command
[ mask
Command
4-2
Command
{ source-mask |