Huawei Quidway S6500 Series Operation Manual page 84

Operation Manual - VLAN
Quidway S6500 Series Ethernet Switches
II. Networking diagram
Switch A Switch A
Figure 2-1 GVRP configuration example
III. Configuration procedure
Configure Switch A:
# Enable GVRP globally.
[Quidway] gvrp
# Set Ethernet1/0/10 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface ethernet1/0/10
[Quidway-Ethernet1/0/10] port link-type trunk
[Quidway-Ethernet1/0/10] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[Quidway-Ethernet1/0/10] gvrp
Configure Switch B:
# Enable GVRP globally.
[Quidway] gvrp
# Set Ethernet1/0/11 as a Trunk port and allows all the VLANs to pass through.
[Quidway] interface ethernet1/0/11
[Quidway-Ethernet1/0/11] port link-type trunk
[Quidway-Ethernet1/0/11] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[Quidway-Ethernet1/0/11] gvrp
E1/0/10 E1/0/10 E1/0/11 E1/0/11
Switch B Switch B
Huawei Technologies Proprietary
Chapter 2 GARP/GVRP Configuration
2-7