Huawei Quidway S6500 Series Operation Manual page 368

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Operation
Define ACL
Exit
system view
Enter
Ethernet port
view
Enter
view
Configure
traffic
policing
Command
Advanced ACL:
rule [ rule-id ] { permit | deny }
protocol [ source { source-addr
wildcard | any } ] [ destination
{ dest-addr dest-mask | any } ]
[ source-port operator port1
[ port2 ] ] [ destination-port
operator port1
[ icmp-type
[ established ] [ [ precedence
precedence | tos tos ]* | dscp
dscp ] [ fragment ] [ time-range
name ]
Basic ACL:
rule [ rule-id ] { permit | deny }
[ source { source-addr wildcard |
any } | fragment | time-range
name ]*
Link layer ACL:
rule [ rule-id ] { permit | deny }
[ protocol-type | format-type | cos
cos | ingress { { source-vlan-id |
source-mac-addr }* | any } |
egress { dest-mac-addr | any } |
time-range name ]*
User-defined ACL:
rule [ rule-id ] { permit | deny }
{ rule-string
offset }&<1-8>
name ]
to
quit
interface {
interface_num | interface_name }
QoS
qos
traffic-limit
{ user-group { acl-number |
acl-name } [ rule rule ] |
{ ip-group
acl-name } [ rule rule ] |
link-group {
acl-name } [ rule rule ] }* }
[ kbps ] target-rate
action ]
Huawei Technologies Proprietary
[ port2 ] ]
type code ]
The commands defining the
ACL rules correspond to the
ACL types.
rule-mask
[ time-range
—
The
interface_type
Ethernet port view corresponds
to the Ethernet port you enter.
The prompt character in QoS
view
Ethernet port you enter.
inbound
{ acl-number |
—
acl-number |
[ exceed
2-16
Chapter 2 QoS Configuration
Remarks
prompt character
corresponds to the
in