Configuration Example - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
SNMP username or group name is one of the features of SNMP V2 and above,
therefore you import the ACL into the commands with SNMP username or group name
configured, for the SNMP V2 and above. If you import the ACL into both features, the
switch will filter both features for the users.
Note:
You can import different ACLs in the three commands listed above.
See the Command Manual for details about these commands.
Note:
Currently you can import only the basic ACLs with digit IDs.

3.3.3 Configuration Example

I. Networking requirement
Only SNMP users from 10.110.100.52 and 10.110.100.46 can access the switch.
II. Networking diagram
Internet
Switch
Figure 3-2 ACL configuration for SNMP users
III. Configuration procedure
# Define a basic ACL.
[Quidway] acl number 2000 match-order config
Huawei Technologies Proprietary
3-5
Chapter 3 ACL Configuration