Huawei Quidway S6500 Series Operation Manual page 463

Operation Manual - Security
Quidway S6500 Series Ethernet Switches
Table 2-11 Setting the password display mode for local users
Set the password display mode for all
local users
Cancel the password display mode for
local users
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
Perform the following configurations in local user view.
Table 2-12 Setting/removing the attributes concerned with a specified user
Set the password of a specific user
Cancel the password of the specific user
Set the state of a specific user
Set the type of service available for the
user
Cancel the type of service available for
the user
Set the priority level of the user
Restore the default priority level
Set the attributes of the local user
Cancel the attributes of the local user
By default, no service is authorized to users. The default user priority level is 0.
Operation
Operation
Huawei Technologies Proprietary
2-10
Chapter 2 AAA and RADIUS Protocol
Command
local-user password-display-mode
{ cipher-force | auto }
undo
password-display-mode
Command
password { simple | cipher } password
undo password
state { active | block }
service-type { ftp
directory ] | lan-access | { ssh | telnet |
terminal }* [ level level ] }
undo service-type { ftp [ ftp-directory ]
| lan-access | { ssh | telnet |
terminal }* }
level level
undo level
{
attribute ip ip-address
|
mac-address idle-cut
access-limit max-user-number | vlan
vlan_id | location { nas-ip ip-address
port portnum | port portnum } }*
undo attribute { ip | mac | idle-cut |
access-limit | vlan | location }*
Configuration
local-user
[
ftp-directory
|
mac
|
second