Huawei Quidway S6500 Series Operation Manual page 621

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Use the save button to save this converted key to a file.
Open the public key file in notepad and add the following lines of text before the existing
text:
rsa peer-public-key mykey
public-key-code begin
Then add the following after the existing text:
public-key-code end
peer end
Also remove any blank lines from the file.
Note:
"myKey" is a name used to identify the key within the switch, you may choose any name
for this.
The file should look like this:
Figure 8-4 Text file of myKey
Save this to a file ending with a ".bat" extenstion e.g "keys.bat".
This file can be transferred to the switch using FTP or TFTP.
The key is installed using the execute command in the System view:
[Quidway] execute keys.bat
Huawei Technologies Proprietary
8-9
Chapter 8 SSH Terminal Services