Setting Line Limit; Setting Traffic Bandwidth - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches

2.2.6 Setting Line Limit

Line limit refers to rate limit based on the port, that is, limiting the total rate at the port.
The adjustment step for line rate of S6500 series switches is 1Mbps.
Please perform the following configurations in QoS view.
Table 2-14 Setting line rate
Set line limit
Remove line limit
Note:
Only the cards except A type ones support the port rate limitation.
You can set line limit at a single port.

2.2.7 Setting Traffic Bandwidth

You can set desired traffic bandwidth to ensure target services.
Please perform the following configurations in QoS view.
Table 2-15 Setting traffic bandwidth
Operation
Set traffic bandwidth
Remove
bandwidth setting
Note:
The cards except A type ones do not support this command.
Operation
traffic-bandwidth outbound { ip-group { acl-number |
acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule
max-guaranteed-bandwidth weight
undo traffic-bandwidth outbound { ip-group { acl-number
traffic
| acl-name } [ rule rule ] | link-group { acl-number |
acl-name } [ rule rule ] }
Huawei Technologies Proprietary
2-18
Chapter 2 QoS Configuration
Command
line-rate [ kbps ] target-rate
undo line-rate
Command
rule ] } min-guaranteed-bandwidth