Huawei Quidway S6500 Series Operation Manual page 279

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
8.2 Route Capacity Configuration
Route capacity configuration includes:
Setting the lower limit and the safety value of the Ethernet switch memory
Enabling/Disabling the Ethernet switch to recover the disconnected routing
protocol automatically
8.2.1 Setting the lower limit and the safety value of the Ethernet switch
memory
When the Ethernet switch memory is equal to or lower than the lower limit, BGP and
OSPF will be disconnected. BGP routes and OSPF routes will be removed from the
routing table..
Perform the following configurations in system view.
Table 8-1 Setting the lower limit and the safety value of the Ethernet switch memory
Set the lower limit and the safety value
of the
simultaneously
Restore the lower limit and the safety
value of the Ethernet switch memory to
the default value
The lower limit value set for the memory must be smaller than the safety value.
8.2.2 Enabling/Disabling the Ethernet switch to Recover the Disconnected
Routing Protocol Automatically
If memory automatic restoration function of an Ethernet switch is disabled, connection
of routing protocols will not be restored even if the free memory restores to the safety
value. Therefore, this configuration should be performed cautiously.
Perform the following configurations in system view.
Operation
Ethernet switch memory
Huawei Technologies Proprietary
Chapter 8 Route Capacity Configuration
memory { safety safety-value | limit
limit-value }*
undo memory [ safety | limit ]
8-2
Command