Link Acl Configuration Example - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
1) Define the time range
# Define time range from 8:00 to 18:00.
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Select ACL mode
# Select ip-based ACL mode.
[Quidway] acl mode ip-based
3) Define the ACL for packet which source IP is 10.1.1.1.
# Enter the named basic ACL, named as traffic-of-host.
[Quidway] acl name traffic-of-host basic
# Define the rules for packet which source IP is 10.1.1.1.
[Quidway-acl-basic-traffic-of-host] rule 1 deny source 10.1.1.1 0 time-range huawei
4) Activate ACL.
# Activate the ACL traffic-of-host .
[Quidway-Ethernet2/0/1] qos
[Quidway-qoss-Ethernet2/0/1] packet-filter inbound ip-group traffic-of-host

1.3.3 Link ACL Configuration Example

I. Networking requirements
Using Link ACL, filter the packet which source MAC address is 00e0-fc01-0101 and
destination MAC address is 00e0-fc01-0303 during time range 8:00 ~ 18:00 every day.
The ACL is activated on Ethernet2/0/1.
II. Networking diagram
Figure 1-3 Access control configuration example
III. Configuration precedure
connect to Router
#1
Switch
Huawei Technologies Proprietary
1-14
Chapter 1 ACL Configuration