Huawei Quidway S6500 Series Operation Manual page 301

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
Reset
information
3.4 IGMP Snooping Configuration Example
I. Networking requirements
To implement IGMP Snooping on the switch, first enable it. The switch is connected
with the router via the router port, and with user PC through the non-router ports.
II. Networking diagram
Router
Switch
Figure 3-4 IGMP Snooping configuration networking
III. Configuration procedure
# Display the status of GMRP.
<Quidway> display gmrp status
# Display the current status of IGMP Snooping when GMRP is disabled.
<Quidway> display igmp-snooping configuration
# Enable IGMP Snooping if it is disabled.
[Quidway] igmp-snooping enable
[Quidway] vlan 10
[Quidway-vlan10] igmp-snooping enable
3.5 IGMP Snooping Troubleshooting
Fault: Multicast function cannot be implemented on the switch.
Operation
the IGMP Snooping
Internet
Multicast
Huawei Technologies Proprietary
Chapter 3 IGMP Snooping Configuration
statistic
reset igmp-snooping statistics
3-7
Command