Entering Qos View - Huawei Quidway S6500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Note:
Type A LPUs do not support configuring queue scheduling.
LPUs excluding the type A LPUs support configuring queue scheduling.

2.2.4 Entering QoS View

You should run most QoS configurations in QoS view.
Please perform the following configurations in Ethernet port view.
Table 2-11 Entering QoS view
Enter QoS view
Note:
Different interface units may support different QoS functions and you can view the QoS
configuration items available for the current interface unit by keying in "?" in QoS view.
For example:
[Quidway-GigabitEthernet7/0/1] qos
[Quidway-qosb-GigabitEthernet7/0/1] ?
Qosb view commands:
catch
display
line-rate
packet-filter
ping
quit
reset
tracert
traffic-limit
traffic-priority Specify new priority of the packets
traffic-redirect Redirect the packets
traffic-statistic Count the packets
undo
Operation
catch
Display current system information
Limit the rate of the outbound packets of the interface
Filter packets based on acl
Ping function
Exit from current command view
Reset operation
Trace route function
Limit the rate of the packets
Cancel current setting
Huawei Technologies Proprietary
2-12
Chapter 2 QoS Configuration
Command
qos