Poe Configuration; Poe Configuration Tasks - Huawei Quidway S6500 Series Operation Manual

Operation Manual - PoE
Quidway S6500 Series Ethernet Switches
Note:
When the switch manages PoE in auto mode, then it compares the port priorities on
board basis. In other words, it cannot compare the priorities of ports on different boards.

1.2 PoE Configuration

The S6500 series can automatically detect any connected device that needs remote
power supply and feeds power to this device.
You can use the command line to set the PoE management mode of the switch
and the maximum PoE power provided by the switch.
You can use the command line to control the PoE on each board independently.
The actions include: enabling/disabling the PoE feature, setting the maximum
output power and enabling/disabling the PoE-compatibility detection on the PoE
board.
You can use the command line to control the PoE on each PoE port independently.
The actions include: enabling/disabling the PoE feature, and setting the maximum
output power, the PoE mode and the power supply priority on the port.

1.2.1 PoE Configuration Tasks

Table 1-1 PoE configuration tasks on the S6500 series
Num
1
2
3
4
5
Operation
Enter the
<Quidway> system-view
system view
Set PoE
[Quidway]
management
power-management { auto
mode of the
| manual } slot slot-num
switch
Set the
maximum PoE [Quidway]
power supplied max-value max-value
by the switch
Enable/disable [Quidway] poe enable slot
PoE on a board slot-num
Set the
maximum PoE [Quidway] poe max-power
power supplied max-power slot slot-num
by the board
Huawei Technologies Proprietary
Command
poe
poe power
1-3
Chapter 1 PoE Configuration
Description
—
Two modes are
available: auto and
manual. It is manual by
default.
It is 2400 W by default,
and you can set it
accordingly.
PoE is disabled on all
boards by default, and
you can enable/disable it
on individual boards
accordingly.
It is 37 W by default, and
you can set
accordingly.
it