Huawei Quidway S6500 Series Operation Manual page 481

Operation Manual - Security
Quidway S6500 Series Ethernet Switches
II. Networking topology
telnet user
Figure 2-1 Configuring the remote RADIUS authentication for Telnet users
III. Configuration procedure
# Add a Telnet user.
Omitted
Note:
For details about configuring FTP and Telnet users, refer to User Interface
Configuration in Getting Started.
# Configure remote authentication mode for the Telnet user, i.e. scheme mode.
[Quidway-ui-vty0-4] authentication-mode scheme
# Configure domain.
[Quidway] domain cams
[Quidway-isp-cams] quit
# Configure RADIUS scheme.
[Quidway] radius scheme cams
[Quidway-radius-cams] primary authentication 10.110.91.164 1812
[Quidway-radius-cams] key authentication expert
[Quidway-radius-cams] server-type Huawei
[Quidway-radius-cams] user-name-format without-domain
# Configuration association between domain and RADIUS.
Authenticati
( IP addre
Switch
Huawei Technologies Proprietary
2-28
Chapter 2 AAA and RADIUS Protocol
on Servers
ss:10.110.91.164 )
Internet Internet
Configuration