Huawei Quidway S6500 Series Operation Manual page 554

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
The information can be classified in terms of the source modules and the
information can be filtered in accordance with the modules.
The output language can be selected between Chinese and English.
2) Sending the Information to loghost.
Table 4-13 Sending the Information to loghost
Device
Switch
Loghost
3) Sending the Information to the console terminal.
Configuration
Enable info-center
Set the information
output direction to
loghost
Set information
source
Refer to configuration
cases for related log
host configuration
Huawei Technologies Proprietary
4-9
Chapter 4 System Maintenance and Debugging
Default value
By default, Other configurations are
info-center is valid only if the info-center
enabled. is enabled.
The configuration about the
loghost on the switch and
that on loghost must be the
-
same;
information cannot be sent
to the loghost correctly.
You
modules and information to
be
time-stamp
- information, and so on. You
must turn on the switch of
the corresponding module
before
debugging information.
- -
Configuration
description
otherwise the
can define which
sent out and the
format of
defining output