Huawei Quidway S6500 Series Operation Manual page 254

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Table 6-41 Clearing BGP connection
Clear the connection between BGP and
the specified peers
Clear all connections of BGP
Clear the connections between the BGP
and all the members of a group
6.2.20 Refreshing BGP Routes
When BGP routing policy changes, it is required to re-compute associated route
information.
Please perform the following configuration in user view.
Table 6-42 Refreshing BGP routes
Refreshing general BGP routes
The import keyword means to refresh the routes learned from the peers and the
export keyword means to refresh routes advertised to the peers.
6.3 Displaying and Debugging BGP
After the above configuration, execute display command in any view to display the
running of the BGP configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of the configuration. Execute
debugging command in user view to debug the configuration. Execute reset
command in user view to reset the statistic information of BGP.
Table 6-43 Displaying and debugging BGP
Display the routing information of the
BGP
Display the statistics of BGP routing
infomation
Display filtered AS path information in
the BGP
Operation
Operation
Operation
Huawei Technologies Proprietary
6-27
Chapter 6 BGP Configuration
Command
reset bgp peer-address [ flap-info ]
reset bgp all
reset bgp group group-name
Command
refresh bgp { all | peer-address | group
group-name } { import | export }
Command
display bgp routing-table [ ip-address
[ mask ] ]
display bgp routing-table statistic
display ip as-path-acl acl-number