Huawei Quidway S6500 Series Operation Manual page 83

Operation Manual - VLAN
Quidway S6500 Series Ethernet Switches
When an Ethernet port is set to be in Forbidden registration mode, all the VLANs
except VLAN1 will be logged out and no other VLANs can be created and
registered on this port.
Perform the following configurations in Ethernet port view.
Table 2-5 Set GVRP registration type
Set GVRP registration type
Restore the default GVRP registration
type
By default, GVRP registration type is normal.
2.2.5 Display and Debug GVRP
After the above configuration, execute display command in any view to display the
running of GVRP configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug the configuration of GVRP.
Table 2-6 Display and debug GVRP
Display GVRP statistics information
Display GVRP global status information
Enable
debugging
Disable
debugging
2.2.6 GVRP Configuration Example
I. Networking requirements
To dynamically register and update VLAN information among switches, GVRP needs to
be enabled on the switches.
Operation
Operation
GVRP packet or
GVRP packet or
Huawei Technologies Proprietary
Chapter 2 GARP/GVRP Configuration
gvrp registration { normal | fixed |
forbidden }
undo gvrp registration
display gvrp statistics [ interface
interface-list ]
display gvrp status
event
debugging gvrp { packet | event}
event undo debugging gvrp { packet |
event }
2-6
Command
Command