Huawei Quidway S6500 Series Operation Manual page 555

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 4-14 Sending the Information to the console terminal.
Device
Switch
4) Sending the Information to monitor terminal
Configuration
Enable info-center
Set the information
output direction to
Console
Set information source
Enable terminal display
function
Huawei Technologies Proprietary
4-10
Chapter 4 System Maintenance and Debugging
Default value
By default, Other configurations are
info-center is valid only if the info-center
enabled. is enabled.
- -
You
modules and information to
be sent
time-stamp
- information, and so on. You
must turn on the switch of
the corresponding module
before
debugging information.
You can view debugging
- information after enabling
terminal display function
Configuration
description
can define which
out and the
format of
defining output