Operation Manual - Reliability
Quidway S6500 Series Ethernet Switches
2.3 Displaying and Debugging HA
After the above configuration, execute the display command in any view to display
the running of the ACL configuration, and to verify the effect of the configuration.
Execute the debugging command in user view to enable HA module debugging
function or view the backup state to monitor the switchover process.
Perform the following configuration in any view.
Table 2-5 Display and debug HA
Display the status of the master/slave
board
Enable
output of the HA module
Disable
output of the HA module
Operation
the
debugging
information
the
debugging
information
Huawei Technologies Proprietary
display switchover state [ slot-id ]
debugging ha { all | event | message |
state }
undo debugging ha { all | event |
message | state }
2-4
Chapter 2 HA Configuration
Command