Huawei Quidway S6500 Series Operation Manual page 44

Operation Manual - Port
Quidway S6500 Series Ethernet Switches
Set the VLAN VPN Feature
Copy port configuration to other ports
1.2.1 Enter Ethernet port view
Before configuring the Ethernet port, enter Ethernet port view first.
Perform the following configuration in system view.
Table 1-1 Enter Ethernet port view
Enter Ethernet port view
1.2.2 Enable/Disable Ethernet Port
The following command can be used for disabling or enabling the port. After configuring
the related parameters and protocol of the port, you can use the following command to
enable the port. If you do not want a port to forward data any more, use the command to
disable it.
Perform the following configuration in Ethernet port view.
Table 1-2 Enable/Disable an Ethernet port
Disable an Ethernet port
Enable an Ethernet port
By default, the port is enabled.
1.2.3 Set Description Character String for Ethernet Port
To distinguish the Ethernet ports, you can use the following command to make some
necessary descriptions.
Perform the following configuration in Ethernet port view.
Operation
Operation
Huawei Technologies Proprietary
Chapter 1 Ethernet Port Configuration
Command
interface { interface_type
interface_name }
shutdown
undo shutdown
1-2
interface_num
Command
|