Huawei Quidway S6500 Series Operation Manual page 433

Operation Manual - STP
Quidway S6500 Series Ethernet Switches
The upstream switch has proprietary protocols concerning spanning tree employed, the
mechanism for its designated port to implement sate transition is similar to that of RSTP.
Port 1 is the designated port.
The downstream switch has MSTP employed. Port 2 is the root port.
Sw itch coming from other manufacturers Sw itch coming from other manufacturers
Port 1 Port 1
Port 2 Port 2
Quidw ay Switch Quidw ay Switch
Figure 4-3 Network diagram for rapid transition configuration
4.2.2 Configuration procedure
I. Configuring rapid transition in system view
Table 4-1 Configure rapid transition in system view
Operation step
Enter system view
Enable
transition
II. Configuring rapid transition in Ethernet port view
Table 4-2 Configure rapid transition in Ethernet port view
Operation step
Enter system view
Enter Ethernet port
view
Command
system-view
stp interface
rapid
interface-number
no-agreement-check
Command
system-view
interface
interface-number
Huawei Technologies Proprietary
4-3
Chapter 4 The Rapid Transition Feature
—
Required
interface-type
Rapid
disabled on a port by
default.
—
interface-type
—
Description
transition is
Description