Huawei Quidway S6500 Series Operation Manual page 236

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
II. Configuring a peer group to be a client of a route reflector
Table 6-10 Configuring a peer (group) to be a client of a route reflector
Configure a peer group to be a client of a
route reflector
Cancel the configuration of making the
peer group as the client of the BGP route
reflector
For detailed information on route reflector, refer to "Configure Route Reflector" section
of this manual.
III. Configuring to send default route to a peer group
Table 6-11 Configuring to send default route to a peer group
Configure to send default route to a peer
group
Configure not to send default route to a
peer group
By default, local router does not send default route to any peer group.The local router
will send a default route with the next hop as itself to the peer unconditionally, even if
there is no default route in BGP routing table.
IV. Configuring itself as the next hop in advertising route
A BGP router can specify itself as the next hop while advertising route to a peer group.
Table 6-12 Configuring itself as the next hop in advertising route
Configure itself as the next hop in
advertising route
Disable the specification of itself as the
next hop in advertising route
By default, local router does not specify itself as the next hop while advertising route to
a peer group.
Operation
Operation
Operation
Huawei Technologies Proprietary
6-9
Chapter 6 BGP Configuration
Command
peer group-name reflect-client
undo peer group-name reflect-client
Command
peer
default-route-advertise
undo peer
default-route-advertise
Command
peer group-name next-hop-local
undo peer group-name next-hop-local
group-name
group-name