Chapter 7 Multicast Mac Address Configuration; Introduction; Adding Multicast Mac Address Entries - Huawei Quidway S6500 Series Operation Manual

Hide thumbs Also See for Quidway S6500 Series:
Table of Contents

Advertisement

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches

Chapter 7 Multicast MAC Address Configuration

7.1 Introduction

In Layer 2 multicast, you can not only dynamically create multicast forwarding entries
using the Layer 2 multicast protocol, but also set manually the multicast MAC address
and bind multicast entries to ports.
Generally, the packet is not broadcasted among the VLAN if its multicast address is not
registered on the local host. You can enable the broadcast, however, by configuring a
multicast static MAC address entry. Then the switch changes from dynamic multicast
learning to static multicast learning and saves the time originally to handle multicast
packets.
If you configure the switch not to forward unknown multicast packets (enabling the
unknown multicast blocked function), the switch cannot forward some specific multicast
packets (such as VRRP packets). You can enable to forward these types of packets by

adding multicast MAC address entries.

7.2 Adding Multicast MAC Address Entries
Follow these steps to add multicast MAC address entries:
Table 7-1 Add multicast MAC address entries
Serial
number
1
2
Use the undo command to remove your configuration.
If the multicast MAC address entry you intend to add has existed, the system gives
the prompt information.
After you manually add a multicast MAC address, the switch cannot learn it using
IGMP snooping. The command can only remove the multicast MAC address
entries manually added, but not those learned by the switch.
To add a port to the multicast MAC address entry which is manually added, you
need first delete the entry and create it again, and then add the specified port as
the forwarding port of the entry.
Operation
Enter system view
Add multicast MAC
address entries
Huawei Technologies Proprietary
Chapter 7 Multicast MAC Address
Command
<Quidway> system-view
[Quidway] mac-address multicast
mac-address interface interface-list
vlan vlan_id
7-1
Configuration
Remarks
-
Mandatory

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Release 3000 series

Table of Contents