Huawei Quidway S6500 Series Operation Manual page 331

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
[Quidway-vlan12] quit
[Quidway] interface vlan-interface 12
[Quidway-vlan-interface12] igmp enable
[Quidway-vlan-interface12] pim sm
[Quidway-vlan-interface12] quit
# Configuring C-BSRs.
[Quidway] pim
[Quidway-pim] c-bsr vlan-interface 10 30 2
# Configuring C-RPs.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255
[Quidway] pim
[Quidway-pim] c-rp vlan-interface 10 group-policy 2000
# Configuring PIM domain boundary
[Quidway] interface vlan-interface 12
[Quidway-vlan-interface12] pim bsr-boundary
After vlan-interface 12 is configured as the PIM domain border, Switch LS_D cannot
receive the BSR messages from Switch LS_B and is excluded from this PIM domain.
3) Configuring Switch LS_C.
# Enabling PIM-SM.
[Quidway] multicast routing-enable
[Quidway] vlan 10
[Quidway-vlan10] port ethernet 0/2 to ethernet 0/3
[Quidway-vlan10] quit
[Quidway] interface vlan-interface 10
[Quidway-vlan-interface10] igmp enable
[Quidway-vlan-interface10] pim sm
[Quidway-vlan-interface10] quit
[Quidway] vlan 11
[Quidway-vlan11] port ethernet 0/4 to ethernet 0/5
[Quidway-vlan11] quit
[Quidway] interface vlan-interface 11
[Quidway-vlan-interface11] igmp enable
[Quidway-vlan-interface11] pim sm
Huawei Technologies Proprietary
6-18
Chapter 6 PIM Configuration