Set The Max Count Of Mac Address Learned By A Port - Huawei Quidway S6500 Series Operation Manual

Hide thumbs Also See for Quidway S6500 Series:
Table of Contents

Advertisement

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
You can use the following commands to set the MAC address aging time for the
system.
Perform the following configuration in system view.
Table 2-2 Set the MAC address aging time for the system
Set the dynamic MAC address aging
time
Restore the default MAC address aging
time
In addition, this command takes effect on all the ports. However the address aging only
functions on the dynamic addresses (the learned or configured as age entries by the
user).
By default, the aging-time is 300 seconds. With the no-aging parameter, the command
performs no aging on the MAC address entries.

2.2.3 Set the Max Count of MAC Address Learned by a Port

With the address learning function, an Ethernet switch can learn new MAC addresses.
After received a packet destined some already learned MAC address, the switch will
forward it directly with the hardware, instead of broadcasting. But Too many MAC
address items learned by a port will affect the switch operation performance.
User can control the MAC address items learned by a port through setting the max
count of MAC address learned by a port. If user set the max count value of a port as
count, the port will not learn new MAC address items when the count of MAC address
items reaches count.
You can use the following commands to set the max count of MAC address learned by
a port.
Perform the following configuration in Ethernet port view.
Table 2-3 Set the Max Count of MAC Address Learned by a Port
Set the max count of MAC address
learned by a port
Restore the default max count of MAC
address learned by a port
By default, the max count of MAC addresses learned by the Ethernet port is 16384.
Operation
Operation
Huawei Technologies Proprietary
2-3
Chapter 2 MAC Address Table Management
Command
mac-address timer { aging age |
no-aging }
undo mac-address timer aging
Command
mac-address max-mac-count count
undo mac-address max-mac-count

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Release 3000 series

Table of Contents