Huawei Quidway S6500 Series Operation Manual page 82

Operation Manual - VLAN
Quidway S6500 Series Ethernet Switches
2.2.2 Enable/Disable Global GVRP
You can use the following command to enable/disable global GVRP.
Perform the following configurations in system view.
Table 2-3 Enable/Disable global GVRP
Enable global GVRP
Disable global GVRP
By default, global GVRP is disabled.
2.2.3 Enable/Disable Port GVRP
You can use the following command to enable/disable the GVRP on a port.
Perform the following configurations in Ethernet port view.
Table 2-4 Enable/Disable port GVRP
Enable port GVRP
Disable port GVRP
GVRP should be enabled globally before it is enabled on the port. The GVRP can only
be enabled/disabled on Trunk port.
By default, port GVRP is disabled.
2.2.4 Set GVRP Registration Type
The GVRP registration types include Normal, Fixed and Forbidden (see IEEE 802.1Q).
When an Ethernet port is set to be in Normal registration mode, the dynamic and
manual creation, registration and logout of VLAN are allowed on this port.
When one Trunk port is set as fixed, the system will add the port to the VLAN if a
static VLAN is created on the switch and the Trunk port allows the VLAN passing.
GVRP will also add this VLAN item to the local GVRP database, one link table for
GVRP maintenance. However, GVRP cannot learn dynamic VLAN through this
port. The learned dynamic VLAN from other ports of the local switch will not be
able to send statements to outside through this port.
Operation
Operation
Huawei Technologies Proprietary
2-5
Chapter 2 GARP/GVRP Configuration
Command
gvrp
undo gvrp
Command
gvrp
undo gvrp