Huawei Quidway S6500 Series Operation Manual page 271

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Cancel the next-hop address of the
routing information
import the route to isis level-1, level-2 or
level-1-2
Remove the function of importing the
route to isis
Set the local preference of the BGP
routing information
Cancel the local preference of the BGP
routing information
Set the routing cost of the routing
information
Cancel the routing cost of the routing
information
set the cost type of the routing information
remove the setting of the cost type
Set the route origin of the BGP routing
information
Cancel the route origin of the BGP routing
information
Set the tag domain of the OSPF routing
information
Cancel the tag domain of the OSPF
routing information
By default, perform no settings.
Please note that if the routing information meets the match conditions specified in the
Route-policy and also notifies the MED value configured with apply cost-type internal
when notifying the IGP route to the EBGP peers, then this value will be regarded as the
MED value of the IGP route. The preference configured with the apply cost-type
internal is lower than that configured with the apply cost command, but higher than
that configured with the default med command.
7.2.4 Importing Routing Information Discovered by Other Routing Protocols
A routing protocol can import the routes discovered by other routing protocols to enrich
its route information. And the Route-policy can be used for route information filtering to
implement the purposeful redistribution. If the destination routing protocol importing the
routes cannot directly reference the route costs of the source routing protocol, you
Operation
Huawei Technologies Proprietary
7-6
Chapter 7 IP Routing Policy Configuration
Command
undo apply ip next-hop
apply isis [ level-1 | level-2 |
level-1-2 ]
undo apply isis
apply local-preference
local-preference
undo apply local-preference
apply cost value
undo apply cost
apply cost-type [ internal | external ]
undo apply cost-type
apply origin { igp | egp as-number |
incomplete }
undo apply origin
apply tag value
undo apply tag