Huawei Quidway S6500 Series Operation Manual page 363

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Table 2-8 Setting mapping table
Operation
Configure
COS→Local-prece
dence
table
Restore the default
mapping
By default, the switch selects the default mapping between them.
II. Choosing priority by which the packets are putted to output queue
Please perform the following configuration in system view.
Table 2-9 Choosing priority scheme for queue scheduling
Choose priority scheme for queue
scheduling
By default, local precedence is selected.
III. Configuring Queue Scheduling
Please perform the following configuration from user view.
Table 2-10 Configuring Queue Scheduling
Enter system view
Enter Ethernet port view
Enter QoS view
Configure Queue Scheduling
qos cos-local-precedence-map
cos1-map-local-prec
cos3-map-local-prec
mapping
cos5-map-local-prec
cos7-map-local-prec
undo qos cos-local-precedence-map
Operation
Operation
Huawei Technologies Proprietary
Command
priority-trust { dscp | ip-precedence |
cos | local-precedence }
system-view
interface interface-type interface-number
qos
queue-scheduler { rr | strict-priority |
wrr queue1-weight
queue3-weight
queue5-weight
queue7-weight queue8-weight }
2-11
Chapter 2 QoS Configuration
cos0-map-local-prec
cos2-map-local-prec
cos4-map-local-prec
cos6-map-local-prec
Command
Command
queue2-weight
queue4-weight
queue6-weight