Set Slot Temperature Limit; Set Backboard View; Enable/Disable Rdram - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Note:
S6506R supports master board and slave board. The two boards both have file system.
User can operate the file on the two boards. In the case user upgrade the BootROM
adopted on slave board, the file directory or URL should be started with
"slot[No.]#flash:", the [No.] is the slave board number. For example, suppose slot 1 is
slave board, "text.txt" file URL on slave board should be "slot1#flash:/text.txt".

3.2.6 Set Slot Temperature Limit

The switch system alarms when the temperature on a slot exceeds the preset limit.
Perform the following configuration in user view.
Table 3-7 Set slot temperature limit
Set slot temperature limit
Restore
default value

3.2.7 Set Backboard View

Perform the following configuration in system view.
Table 3-8 Set back board view
Set back board view
Salience III series engines do not support this operation.

3.2.8 Enable/Disable RDRAM

Using the following command, yon can enable or disable RDRAM (Rambus Dynamic
Random Access Memory) of the device.
Perform the following configuration in system view.
Operation
temperature limit to
Operation
Huawei Technologies Proprietary
Command
temperature-limit
up-value
undo temperature-limit slot-num
set backboard view value
3-4
Chapter 3 Device management
slot-num down-value
Command