Huawei Quidway S6500 Series Operation Manual page 558

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 4-18 Sending the Information to SNMP
Device
Switch
Network
management
workstation
8) Turn on/off the information synchronization switch in Fabric
Configuration
Enable info-center
Set the information
output direction to
SNMP
Set information
source
Configuring SNMP
features
The same as the
SNMP configuration
of the switch
Huawei Technologies Proprietary
4-13
Chapter 4 System Maintenance and Debugging
Default value
By default, Other configurations are
info-center is valid only if the info-center
enabled. is enabled.
- -
You
modules and information to
be
time-stamp
information, and so on.
-
You must turn on the
switch
corresponding
before
debugging information.
See Chapter 5
-
Configuration
- -
Configuration
description
can define which
sent out and the
format of
of the
module
defining output
SNMP