Huawei Quidway S6500 Series Operation Manual page 372

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
I. Configuration on A Type Card
Table 2-17 Relabeling priority level
Operation
Relabel traffic
priority
Remove
setting
Note:
A type card includes LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA and
LS81GT8UA cards.
II. Configuration on the Cards except A Type Ones
Table 2-18 Relabeling priority level
Operation
Relabel traffic
priority
Remove
setting
Note:
Combined activating of IP ACL and Link ACL is supported by the cards except A type
ones. But the sum of the bytes number defined by IP ACL and that defined by the Link
ACL can not exceed 32 bytes; otherwise the ACL can not be activated.
The switch support IP priority (ip-precedence value in the traffic-priority command),
DSCP priority (dscp value in the traffic-priority command) according to your needs.
traffic-priority { inbound | outbound } { ip-group { acl-number |
acl-name } [ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] } { { dscp dscp-value | ip-precedence pre-value } |
local-precedence pre-value }*
undo traffic-priority { inbound | outbound } { ip-group
the
{ acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } [ rule rule ] }
traffic-priority inbound { user-group { acl-number | acl-name }
[ rule rule ] | { ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }* } { { dscp
dscp-value | ip-precedence pre-value } | { cos cos |
local-precedence pre-value } }*
undo traffic-priority inbound { user-group { acl-number |
the
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name } [ rule
rule ] | link-group { acl-number | acl-name } [ rule rule ] }* }
Huawei Technologies Proprietary
Command
Command
2-20
Chapter 2 QoS Configuration