Huawei Quidway S6500 Series Operation Manual page 240

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
III. Configuring route filtering policy based on AS path list for a peer (group)
Table 6-20 Configuring route filtering policy based on AS path list for a peer (group)
Configure the ingress route filtering
policy based on AS path list for a peer
(group)
Remove the ingress route filtering policy
based on AS path list of a peer (group)
Configure the egress route filtering
policy based on IP ACL for a peer group
Remove the egress route filtering policy
based on IP ACL for a peer group
By default, route filtering based on AS path list for a peer (group) is disabled.
IV. Configuring route filtering policy based on address prefix list for a peer
(group)
Table 6-21 Configuring route filtering policy based on address prefix list for a peer
(group)
Configure the ingress route filtering
policy based on address prefix list for a
peer (group)
Remove the ingress route filtering policy
based on address prefix list of a peer
(group)
Configure the egress route filtering
policy based on address prefix list for a
peer group
Remove the egress route filtering policy
based on address prefix list for a peer
group
By default, route filtering based on address prefix list for a peer (group) is disabled.
6.2.5 Configuring Networks for BGP Distribution
Perform the following configurations in BGP view.
Operation
Operation
Huawei Technologies Proprietary
6-13
Chapter 6 BGP Configuration
Command
peer { peer-address | group-name }
as-path-acl acl-number import
undo peer {
group-name } as-path-acl acl-number
import
peer group-name
acl-number export
undo peer group-name as-path-acl
acl-number export
Command
peer { peer-address | group-name }
ip-prefix prefixname import
undo peer {
group-name } ip-prefix
import
peer group-name ip-prefix prefixname
export
undo peer group-name
prefixname export
peer-address |
as-path-acl
peer-address |
prefixname
ip-prefix