Enable/Disable Snmp Agent To Send Trap - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 5-3 Set the method of identifying and contacting the administrator
Set the method of identifying and
contacting the administrator
Restore the default method of
identifying
administrator
By default, the system contacting method is " Hangzhou Huawei-3Com Tech. Co.,Ltd. ";
the location is " Beijing China "; the version is SNMPv3.

5.3.3 Enable/Disable SNMP Agent to Send Trap

The managed device transmits trap without request to the Network Management
Station to report some critical and urgent events (such as restart).
You can use the following commands to enable or disable the managed device to
transmit trap message.
Perform the following configuration in system view.
Table 5-4 Enable/Disable snmp agent to send Trap
Operation
Enable to send trap
Disable to send trap
Enable current port to
transmit the LINK UP and
LINK
information.
port view)
Disable current port to
transmit the LINK UP and
LINK
information.
port view)
Operation
and contacting
snmp-agent trap enable [ standard [ authentication ]
[ coldstart ] [ linkdown ] [ linkup ] | bgp
[ backwardtransition ] [ established ] | vrrp
[ authfailure | newmaster ] ]
undo
[ authentication ] [ coldstart ] [ linkdown ] [ linkup ] |
bgp [ backwardtransition ] [ established ] | vrrp
[ authfailure | newmaster ] ]
DOWN trap enable snmp trap updown
(Ethernet
DOWN trap
undo enable snmp trap updown
(Ethernet
Huawei Technologies Proprietary
snmp-agent sys-info { contact sys-contact |
location sys-location | version { { v1 | v2c |
v3 }* | all } }
undo snmp-agent sys-info { { contact |
the
location }* | version { { v1 | v2c | v3 }* | all } }
Command
snmp-agent trap
5-4
Chapter 5 SNMP Configuration
Command
enable [ standard