Create/Update View Information Or Deleting A View; Set The Size Of Snmp Packet Sent/Received By An Agent; Disable Snmp Agent - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches

5.3.12 Create/Update View Information or Deleting a View

You can use the following commands to create, update the information of views or
delete a view.
Perform the following configuration in system view.
Table 5-13 Create/Update view information or deleting a view
Create/Update view information
Delete a view

5.3.13 Set the Size of SNMP Packet Sent/Received by an Agent

You can use the following commands to set the size of SNMP packet sent/received by
an agent.
Perform the following configuration in system view.
Table 5-14 Set the size of SNMP packet sent/received by an agent
Set the
sent/received by an agent
Restore the default size of SNMP packet
sent/received by an agent
The agent can receive/send the SNMP packets of the sizes ranging from 484 to 17940,
measured in bytes. By default, the size of SNMP packet is 2000 bytes.

5.3.14 Disable SNMP Agent

To disable SNMP Agent, please Perform the following configuration in system view.
Table 5-15 Disable snmp agent
Disable snmp agent
If user disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.
Operation
Operation
size of SNMP packet
Operation
Huawei Technologies Proprietary
5-8
Chapter 5 SNMP Configuration
Command
snmp-agent mib-view { included |
excluded } view-name oid-tree
undo snmp-agent mib-view view-name
Command
snmp-agent packet
byte-count
undo snmp-agent packet max-size
Command
undo snmp-agent
max-size