Set Snmp Version; Set The Engine Id Of A Local Or Remote Device; Set/Delete An Snmp Group - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 5-7 Set sysLocation
Set sysLocation
Restore the default location of the
Ethernet switch
By default, the sysLocation is specified as "Beijing China".

5.3.7 Set SNMP Version

You can use the following commands to set the Set SNMP Version.
Perform the following configuration in system view.
Table 5-8 Set SNMP Version
Set SNMP Version
Restore the default SNMP Version of the
Ethernet switch

5.3.8 Set the Engine ID of a Local or Remote Device

You can use the following commands to set the engine ID of a local or remote device.
Perform the following configuration in system view.
Table 5-9 Set the engine ID of a local or remote device
Set the engine ID of the device
Restore the default engine ID of the
device.
By default, the engine ID is expressed as enterprise No. + device information. The
device information can be IP address, MAC address, or user-defined text.

5.3.9 Set/Delete an SNMP Group

You can use the following commands to set or delete an SNMP group.
Perform the following configuration in system view.
Operation
Operation
Operation
Huawei Technologies Proprietary
5-6
Chapter 5 SNMP Configuration
Command
snmp-agent sys-info
sysLocation
undo snmp-agent sys-info location
Command
snmp-agent sys-info version { { v1 |
v2c | v3 } * | all }
undo snmp-agent sys-info version
{ { v1 | v2c | v3 } * | all }
Command
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
location