Huawei Quidway S6500 Series Operation Manual page 556

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 4-15 Sending the Information to monitor terminal
Device
Switch
5) Sending the Information to log buffer.
Configuration
Enable info-center
Set the information
output direction
monitor
Set information source
Enable the terminal
display function and
this function for the
corresponding
information
Huawei Technologies Proprietary
4-11
Chapter 4 System Maintenance and Debugging
Default value
By default, Other configurations are
info-center is valid only if the info-center
enabled. is enabled.
to - -
You
modules and information to
be
time-stamp
- information, and so on. You
must turn on the switch of
the corresponding module
before
debugging information.
For Telnet terminal and
dumb terminal, to view the
information,
- enable the current terminal
display function using the
terminal
command.
Configuration
description
can define which
sent out and the
format of
defining output
you must
monitor