Huawei Quidway S6500 Series Operation Manual page 95

Operation Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
1.2 Configure IP Address
The IP address configuration includes:
Configuring the Hostname and Host IP Address
Configure IP Address of the VLAN Interface
1.2.1 Configuring the Hostname and Host IP Address
The host name is corresponded to the IP address by using this command. When you
use the applications like telnet, you can use the host name without having to memorize
the IP address since the system translates it to the IP address automatically.
Perform the following configuration in System view.
Table 1-2 Configuring the host name and the corresponding IP address
Configure
corresponding IP address
Delete the hostname and the corresponding IP
address
By default, there is no host name associated to any host IP address.
1.2.2 Configure IP Address of the VLAN Interface
You can configure an IP address for every VLAN interface of the Ethernet Switch.
Generally, it is enough to configure one IP address for an interface. You can also
configure eight IP addresses for an interface at most, so that it can be connected to
several subnets. Among these IP addresses, one is the primary IP address and all
others are secondary.
Perform the following configuration in VLAN interface view.
Table 1-3 Configure IP address for a VLAN interface
Configure IP address for a VLAN
interface
Delete the IP address of a VLAN
interface
By default, the IP address of a VLAN interface is null.
Operation
the hostname and
Operation
Huawei Technologies Proprietary
1-4
Chapter 1 IP Address Configuration
Command
the
ip host hostname ip-address
undo ip
[ ip-address ]
Command
ip address ip-address
mask-length } [ sub ]
undo ip address ip-address { mask |
mask-length } [ sub ]
host hostname
{ mask |