Configuring The Switch To Track A Specified Interface - Huawei Quidway S6500 Series Operation Manual

Operation Manual - Reliability
Quidway S6500 Series Ethernet Switches
Table 1-7 Configure VRRP timer
Operation
Configure VRRP timer
Clear VRRP timer
By default, adver-interval is configured to be 1.

1.2.8 Configuring the Switch to Track a Specified Interface

VRRP interface track function has expanded the backup function. Backup is provided
not only to the interface where the virtual router resides, but also to some other
malfunctioning switch interface. By implementing the following command you can
track some interface. If the interface which is tracked is down, the priority of the
switch including the interface will reduce automatically by the value specified by
value-reduced, thus resulting in comparatively higher priorities of other switches
within the virtual router, one of which will turn to master switch so as to track this
interface.
Perform the following configuration in VLAN interface view and Ethernet interface
view.
Table 1-8 Configure the switch to track a specified interface
Configure
specified interface
Stop tracking the specified
interface
By default, value-reduced is 10.
vrrp
adver-interval
undo vrrp vrid virtual-router-ID timer advertise
Operation
to track a
Huawei Technologies Proprietary
Command
vrid virtual-router-ID
Command
vrrp vrid virtual-router-ID track interface-type
interface-num [ reduced value-reduced ]
undo vrrp vrid
interface-type interface-num
value-reduced ]
1-8
Chapter 1 VRRP Configuration
timer advertise
virtual-router-ID
[ reduced
track