Huawei Quidway S6500 Series Operation Manual page 81

Operation Manual - VLAN
Quidway S6500 Series Ethernet Switches
Table 2-2 Display and debug GARP
Display
information
Display GARP timer
Clear GARP statistics information
Enable GARP event debugging
Disable GARP event debugging
2.2 Configure GVRP
2.2.1 GVRP Overview
GARP VLAN Registration Protocol (GVRP) is a GARP application. Based on GARP
operating mechanism, GVRP provides maintenance of the dynamic VLAN registration
information in the switch and propagates the information to other switches. All the
GVRP-supporting switches can receive VLAN registration information from other
switches and dynamically update the local VLAN registration information including the
active members and through which port those members can be reached. All the
GVRP-supporting switches can propagate their local VLAN registration information to
other switches so that the VLAN information can be consistent on all GVRP-supporting
devices in one switching network. The VLAN registration information propagated by
GVRP includes both the local static registration information configured manually and
the dynamic registration information from other switches.
GVRP is described in details in the IEEE 802.1Q standard. Quidway Series Ethernet
Switches fully support the GARP compliant with the IEEE standards.
Main GVRP configuration includes:
Enable/Disable global GVRP
Enable/Disable port GVRP
Set GVRP registration type
In the above-mentioned configuration tasks, GVRP should be enabled globally before it
is enabled on the port. Configuration of GVRP registration type can only take effect
after the port GVRP is enabled. Besides, GVRP must be configured on the Trunk port.
Operation
GARP statistics
Huawei Technologies Proprietary
Chapter 2 GARP/GVRP Configuration
Command
display garp
interface-list ]
display garp timer [ interface interface-list ]
reset garp statistics
interface-list ]
debugging garp event
undo debugging garp event
2-4
statistics [ interface
[ interface