Huawei Quidway S6500 Series Operation Manual page 210

Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Table 5-7 Setting the CSNP packet broadcast interval
Set the CSNP packet broadcast interval,
measured in seconds
Restore the default CSNP packet
broadcast interval on the interface
If the level is not specified, it defaults to setting both Level-1 and level-2 intervals.
By default, the CSNP packet is transmitted via interface every 10 second.
5.2.8 Setting the LSP Packet Interval
LSP carries the link state records for propagation throughout the area.
Perform the following configurations in Interface view.
Table 5-8 Setting the LSP packet interval
Set LSP packet interval on the interface,
measured in milliseconds.
Restore the default LSP packet interval
on the interface
By default, the LSP packet is transmitted via the interface every 33 millisecond.
5.2.9 Setting LSP Packet Retransmission Interval
Over a p2p link, if the local end does not receive the response within a period of time
after it sends an LSP packet, it considers that the originally transmitted LSP packet has
been lost or dropped. In order to guarantee the transmission reliability, the local router
will retransmit the original LSP packet.
Perform the following configurations in Interface view.
Operation
Operation
Huawei Technologies Proprietary
5-9
Chapter 5 Integrated IS-IS Configuration
Command
isis timer csnp seconds [ level-1 |
level-2 ]
undo isis timer csnp [ level-1 |
level-2 ]
Command
isis timer lsp time
undo isis timer lsp